Wooden Floor Registers
Unfinished oak floor registers with a damper, ready to stain to match the floor.
| Material | Wood |
|---|---|
| Finishes | Unfinished Oak |
| Mounts On | Floor |
| Airflow Pattern | 2-Way |
| Airflow Control | Adjustable Damper |
| Order By | Duct Opening |

Sizing: Wooden Floor Registers
Order the size of the opening. The faceplate is 1½ in larger on the short side and 1-7/16 in larger on the long side.
- Take off the old cover so you can see the opening.
- Measure the opening edge to edge, both directions. Do not measure the old faceplate.
- Order the size that matches the opening.
Example: 4 × 10 opening → 5½ × 11-7/16 faceplate
Wooden Floor Registers
Enter two measurements between 1 and 60 inches.
- Size To Order
- 4 × 10 in
- Faceplate, Outside Edge
- 5½ × 11-7/16 in
Choose the size option listed as 4 × 10. The faceplate needs about 5½ × 11-7/16 inches of flat surface around the opening.
